User Tools (System Settings)

Tray Paper Size: (Tray 2,3)

You can select the size of the copy paper loaded in the paper tray.

The paper sizes you can load for trays, when the paper size selector knob is set to the p mark, are as follows:

A3L, B4 JISL, A4K, A4L, B5 JISK, B5 JISL, A5K, A5L, 210 ⋅ 340 mmL, 210 ⋅ 182 mmK, 210 ⋅ 170 mmK

11"⋅17"L, 81/2"⋅14"L, 81/2"⋅13"L, 81/2"⋅11"K, 81/2"⋅11"L, 81/4"⋅13"L, 8"⋅13"L, 71/4"⋅101/2"L, 51/2"⋅81/2"K, 51/2"⋅81/2"L, 11"⋅15"L, 11"⋅14"L, 10"⋅15"L, 81/4"⋅14"L, 8"⋅101/2"L, custom size (139.7-297 mm(5.5"-11.7") wide ⋅ 139.7-431.8 mm(5.5"-17") long)

8K(267 ⋅ 390 mm)L, 16K(195 ⋅ 267 mm)K, 16K(195 ⋅ 267 mm)L

4

Important

If the specified paper size differs from the size of paper actually set in the

 

paper tray, a paper misfeed might occur because the paper size cannot be

detected accurately.

Note

Default: A4K

The tray fence for the optional large capacity tray (LCT) is fixed. If you need to change the paper size, contact your service representative.

The optional tab sheet holder is required when using tab stock in tray 2 or 3.

Reference

See p.113 “Changing the Paper Size”.

Paper Type: Bypass tray

You can sets the display to show the type of paper loaded in the bypass tray.

The paper types you can set for the bypass tray are as follows:

Plain paper (No Display), Recycled Paper, Special Paper, Colour Paper 1, Colour Paper 2, Translucent Paper, Letterhead, Thick Paper, Label Paper, OHP, Cardstock, Bond Paper, Prepunched Paper, Preprinted Pa- per

Note

Default: No display

Paper Type: (Tray1-3, LCT)

You can sets the display to show the type of paper loaded in each of the trays. This information is used by the print function to automatically select the pa- per tray.

• The paper types you can set for trays are as follows:

Plain paper (No Display), Recycled Paper, Special Paper, Translucent Paper, Letterhead, Thick Paper, Colour Paper 1, Colour Paper 2, Tab Stock (2-3 tray), Bond Paper, Prepunched Paper, Preprinted Paper

56