Getting Started

Turning Off the Power

A Press the operation switch.

1

The On indicator goes off.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B Open the switch cover, and turn off the main power switch.

The main power indicator goes off.

ZGVH471N

ZGVS310N

Note

In the following cases, the indi- cator will not go off but will in- stead blink when you press the operation switch:

During communication with external equipment.

When the hard disk is active.

Turning Off the Main Power

Important

Do not turn off the main power switch when the On indicator is on or blinking. Failure to observe this may result in damage to the hard disk or memory, leading to mal- function.

Be sure to pull out the power cord only after you have turned off the main power switch. Not doing this may result in damage to the hard disk or memory.

A Make sure the On indicator is off.
Saving Energy-Energy Saver Mode

If you do not operate the machine for a certain period of time, or when you press the {Energy Saver} key, the display disappears and the machine goes into Energy Saver mode. When you press the {Energy Saver} key again, the machine returns to the ready condition. The machine uses less electricity in Energy Saver mode.

Note

You can change the amount of time the machine waits before switch- ing to Energy Saver mode after copying has finished or the last op- eration is performed. See p.58 “En- ergy Saver Timer”.

26