Holsten1AE_Basic_FM.book Page 15 Monday, November 6, 2000 8:10 PM
Memory Transmission and Immediate Transmission
Immediate Transmission
Immediate Transmission is conven- ient when:
•You wish to quickly check whether you have successfully connected with the other party's fax machine.
•Your machine's memory is getting full.
The machine dials immediately after you press the {Start} key. The mes- sage is scanned and transmitted page by page without being stored in memory.
A Make sure that the machine is in standby mode.
The display should look like this:
READY | 100% 10:00 |
SET DOC. OR DIAL NO.
Note
❒The memory indicator should go out. If the memory indicator is lit, press the {Memory} key.
B Place the entire document face down into the Automatic Docu- ment Feeder.
C Dial.
TRANSMIT Y/START 5551234kkkkkkkkkkkkk
Note
❒If you install an external tele- phone, you can send the mes- sage manually. Pick up the external telephone handset and dial.
D Press the {Start} key.
5551234 DIALING
The machine dials and connects to the other party. The number that you dialed and the other party's OWN NAME or FAX NUMBER is displayed.
Canceling an Immediate Transmission
Before start is pressed
A Press the {Stop} key, or remove the document you have set.
2
TRANSMIT OPTIONi
DIAL FAX NUMBER
Note
❒No more than 30 pages (80g/ m2).
❒You can dial before you set the document. Place the document after you dial the number and go to step D.
While dialing or during transmission
A Press the {Stop} key.
However, the fax message which has already scanned in has trans- mitted.
Remove the document after it is canceled.
15
