Ricoh FAX1700L manual Printdensity

User Parameters (function 63)			TECHNICAL REFERENCE
SW	Digits & Definition	Settings
	AUTHORIZEDRECEPTION
08	2, 3:	Bits
	(Can also use function 62)	2	3 :
		0	X: Off
		1 0: Receive messages only from
			senders whose RTI/CSIs are
			programmed.
		1 1: Receive messages only from
			senders whose RTI/CSIs are
			programmed.
10	7: Use dithering halftone (SPD) or	STD: 0
	standard halftone (STD)?	SPD: 1
	HALFTONEMETHOD
12	2: Faxing & Report Toner Saving Off: 0	On: 1
	ECONOMYPRINTINGMODE
	Note:
	If on, contrast will be set to "Normal" automatically, preserving image quality.
	This is available when receiving fax messages and printing				reports, but not
	for copying.
	Further, messages sent to you in halftone mode will automatically turn off
	toner saving to insure a clear image.
	To make sure that the fax quality is acceptable with toner saving on, print a
	few reports.
	(Note: If the sender is using a machine made by another manufacturer, toner
	saving will stay on and this could lower image quality.)
	3, 4: Fax reception	Bit		3	4
	density	Normal:		0	0
	PRINTDENSITY	Darken:		0	1
		Lighten:		1	0
13	Access to the public telephone line	Bit			0	1
		Loop Start			0	0
		Ground Start			0	1
		(This feature is not available in
		France.)
		Flash Start			1	1
		PSTN			0	0

67