Ricoh FAX1700L manual Installation, Machine Environment

INSTALLATION Machine Environment

INSTALLATION

Before installing your machine, read the safety instructions at the beginning of this manual. To install the machine, follow these procedures:

1-Find a suitable location for the machine.

2-Remove all the pieces of tape attached to the machine.

3-Install the photoconductor and toner cassette. (See page 78.)

4-Attach the accessories and load the paper in the paper tray. (See page 79.) 5-Connect the phone line. (See page 84.)

6-Connect the power. (See page 86.)

7-Enter all necessary information and settings in your machine’s memory. (See page 87.)

Machine Environment

WARNING: When choosing a location for your machine, please follow the safety instruction given on pages i to iv of this manual.

Location

For the best possible performance, install your machine in a place which satisfies the following conditions.

❐Not exposed to direct sunlight

❐Well ventilated (air turnover at least three times per hour); to avoid the

build-up of ozone, make sure to locate the machine in a large well-venti- lated room which has an air turnover of more than 30 m3/hr per person.

❐Level

❐Not subject to vibration

❐Away from other electronic equipment, to avoid interference

❐Away from areas containing corrosive gas

❐Dust-free

❐Condensation-free

❐Temperature 15 to 25°C

❐Humidity 35 to 70% RH (do not install near a humidifier)

❐Away from heaters and air conditioners, to avoid sudden changes of tem- perature

❐Within 5 meters of a three-pin grounded power outlet (220-240 Volts, 50/60 Hz; Only 50Hz is printed on the rating plate of some machines.)

76