Clearing Document Jams | Troubleshooting |
Clearing Document Jams
If CLEARORIGINALappears in the display:
Problem: There is a document jammed in the feeder. Remove the jammed document and repeat the transmission procedure.
Cause: The document may be longer than the maximum limit (see the docu- ment specifications on page 72).
1 Grasp the center of the operation panel and pull forward to open it.
2If the jammed paper is visible from the document tray, pull it out from the front of the machine.
If the jammed paper has been fed right into the machine, hold the panel open and remove it from in- side.
3
4
Close the panel firmly.
Pull the copy output tray forward.
Set the document again after "READY" appears in the display.
55