Samsung CLP-775 SERIES, CLP775ND manual Emulation, Color, Network

Option	Description
Select Forma	Form overlay is images stored in the printer
	hard disk drive (HDD) as a special file format
	that can be printed in layers on any document.
	(See "Form file" on page 89.)
	• Select Form is not displayed when
	Form Menu is set as Off.
	• 2nd Form is displayed when Form
	Menu is set as Double Form.
Language	Allows you to change the language that appears
	on the display. (See "Changing the display
	language" on page 40.)
Power Save	Reduce energy consumption by setting power
	saving features. (See "Using power saving
	feature" on page 41.)
Wakeup Event	You can set the condition to wake up from
	power-save mode. Set the item on.
	• Button Press: When you press power
	button, the machine wake up from the power
	save mode.
	• Printer: When you open or close the paper
	tray, the machine wake up from the power
	save mode.
Auto Continue	This item determines whether or not the
	machine continues printing when it detects
	paper that is not matched to your paper setting.
	• Off: If a paper mismatch occurs, the
	message remains on the display and the
	machine remains off-line until you insert the
	correct paper.
	• On: If the paper is mismatched, an error
	message displays. The machine goes
	off-line for 30 seconds then automatically
	clears the message and continues printing.
Altitude Adjustment	Print quality is affected by atmospheric
	pressure. The atmospheric pressure is
	determined by the height of the machine above
	sea level. This feature lets you adjust the
	altitude in a height district. The higher the
	altitude, the higher the adjustment, the highest
	being High 3. (See "Altitude adjustment" on
	page 40.)
Auto CR	This option allows you to append the required
	carriage return to each line feed, which is useful
	to the Unix user or DOS user.
Job Timeout	You can set the amount of time a single print job
	is active before it must print. The machine
	handles incoming data as a single job, if it
	comes in within the specified time. When an
	error occurs while processing data from the
	computer and the data flow stops, the machine
	waits the specified amount of time and then
	cancels printing if data flow does not resume.
Maintenance	This menu allows you to maintain consumables
	within the machine and check supplies' life. You
	can clean fuser components.

Option	Description
Clear Settings	This menu item allows you to restore the
	printer's factory default settings.
Spoolinga	To spool documents in HDD for the network
	printing, select On.

a. This menu item is available when the optional hard disk is installed.

Emulation

Option	Description
Emulation Type	The machine language defines how the
	computer communicates with the machine.
	If you select Auto, your machine can change the
	machine language automatically.
Setup	You can set the detailed settings for the
	emulation type you selected.
Color
Option	Description
Custom Color	This menu allows you to adjust contrast, color by
	color.

•Default: Optimizes colors automatically.

•Manual Adjust: Allows you to manually adjust the color contrast for each cartridge.

	It is recommended to use the Default setting for
	best color quality.
Auto Color Reg.	You can adjust the position of color texts or
	graphics to match the position of the printed
	colors to those on your screen.
	If you have moved the machine, it is
	strongly recommended to operate this
	menu manually.
Density Calibration	You can manually calibrate the toner density of
	machine for the best possible color print quality.
Density Control	The machine automatically calibrates the toner
	density of machine for the best possible color
	print quality.
	If you select Off, the machine is calibrated by
	the factory default toner density.
Network
Option	Description
Ethernet Speed	Configure the network transmission speed.

Machine status and advanced features_ 58