Management tools_ 64
The printer control buttons are, as follows:
•Refresh: Renews the available machines list.
•Add Printer: Allows you to add a new machines.
•Remove Printer: Removes the selected machine.
•Set as Default: Sets the current selected machine as a default
machine.
•Stop/Start: Stops/starts the machine.
•Test: Allows you to print a test page to ensure the machine is
working properly.
•Properties: Allows you to view and change the printer properties.

Classes Tab

The Classes tab shows a list of available machine classes.
•Refresh: Renews the classes list.
•Add Class: Allows you to add a new machine class.
•Remove Class: Removes the selected machine class.
Ports configuration
In this window, you can view the list of available ports, check the status of
each port and release a port that is stalled in a busy state when its owner
has terminated the job for any reason.
•Refresh: Renews the available ports list.
•Release port: Releases the selected port.
3Shows the status, model name and URI of your machine.
1Shows all of the machine classes.
2Shows the status of the class and the number of machines in the
class.
1Switches to Ports configuration.
2Shows all of the available ports.
3Shows the port type, device connected to the port, and status