7Network
7.3MagicInfo Lite Settings
O MENU m 
Network 
MagicInfo Lite Settings 
ENTER[
]
1Server
Setting the MagicInfo Lite server IP
Enter the server IP address and port number.
Use 7001 as the port number.
If unable to connect to the server using port number 7001, check with your server administrator to find the correct port number and then change the port number.
FTP Mode
Select an FTP operating mode: Active or Passive.
Default Storage
Specify the default memory to save schedules or content sent from the server to.
If the default storage space is set to USB, a schedule will not run if a USB device is not connected.
Send a notification message to the server when internal memory is used up.
2Storage
Internal Memory: Displays the space currently being used or deletes all content.
USB: Displays the space currently being used.
3Slideshow
Image Viewer Time: Sets the time length you want to display images played from Local Schedule or by one of the auto playback functions.
PPT Viewer Time: Sets the time length you want to display each page of a document file played from Local Schedule or by one of the auto playback functions.
Image Effect: Configures the image transition effects
Fade1, Fade2, Blind, Spiral, Checker, Linear, Stairs, Wipe, Random, None
4Schedule Name
Select a schedule title format when creating a local schedule:
YYYYMMDD, YYYYDDMM or DDMMYYYY
5Safely Remove USB
Safely removes USB memory.
6Information
Device Name: Displays the name of a device recognized by the server.
Serial Number: Displays the original identification number of a device.
Software Version: Displays the software version of a device
Refer to page 118 for details about the MagicInfo Lite Player Guide menu.
7 Network 139
