8System
Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the Internal Speaker.
1Select Receiver and set to On.2Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
When the receiver (i.e Home Theater) is set to On, you can hear sound output from the product Optical jack. When the source is a digital component such as a DVD player and it is connected to the product via HDMI, you will hear only 2 channel sound from the receiver.
Troubleshooting for Anynet+
| Problem |
| Possible Solution |
|
|
|
| Anynet+ does not work. | | Check if the device is an Anynet+ device. The Anynet+ system |
|
| supports Anynet+ devices only. |
| You can connect only one receiver (home theater). | |
| Check if the Anynet+ device power cord is properly connected. | |
| Check the Anynet+ device’s Video/Audio/HDMI cable | |
|
| connections. |
| Check whether Anynet+ | |
|
| Anynet+setup menu. |
| Check whether the remote control is Anynet+ compatible. | |
| If you have removed and then reconnected the HDMI cable, | |
|
| please make sure to search devices again or turn your product off |
|
| and on again. |
| Check if the Anynet+ function of the Anynet device is set on. | |
|
|
|
| I want to start Anynet+. | | Check if the Anynet+ device is properly connected to the product |
|
| and check if the Anynet+ |
|
| Anynet+ Setup menu. |
| Press the TOOLS button to display the Anynet+ menu and select | |
|
| a menu you want. |
|
|
|
| I want to exit Anynet+. | | Select View PC in the Anynet+ menu. |
| Press the SOURCE button on the product remote control and | |
|
| select a non- Anynet+ device. |
|
|
|
| The message “Connecting to | | You cannot use the remote control when you are configuring |
| Anynet+ device...” appears on |
| Anynet+ or switching to a view mode. |
| the screen. | | Use the remote control after the product has completed Anynet+ |
| ||
|
| configuration or has finished switching to Anynet+. |
|
|
|
8 System 157