![](/images/new-backgrounds/1204752/20475231x1.webp)
Printing a test page
After installation, you may run a simple test on your machine by printing a test page.
1.When only the READY light is on, press and hold the button for about 2 seconds.
ERROR PAPER READY
2.When all the indicators blink, release the button. A demo page will print out.
If you press and hold the button for over 4 seconds, a configuration sheet of the user default settings, the installed options, and the amount of printer memory available will print.
Note: If this does not happen,
Setting up your printer 1.11