Installing RCP only for Dos users | Samsung ML-5200A specification

01-Setup 3/2/00 9:43 AM Page 19

5.Click Install the USB driver on your PC.

6. Follow the instructions on the screen to complete the installation.

Note : You can install the USB driver in the Windows 98.

Installing RCP (only for Dos users)

The RCP (Remote Control Panel) allows the Dos users to set default printer values. This utility can only be used when the printer is connected via the parallel interface.

1.Insert the setup CD-ROM into your CD-ROM drive.

2.In the DOS prompt C:\>, type “xcopy d:\5200\eng\rcp\. c:\prtutil”

(where “d” is your CD-ROM drive letter) in the command line, and press Enter.

The DOSRCP file is copied into the PRTUTIL directory.

Setting up your printer 1.17

Samsung ML-5200A manual Installing RCP only for Dos users

Models: ML-5200A

Installing RCP (only for Dos users)

2.In the DOS prompt C:\>, type “xcopy d:\5200\eng\rcp\. c:\prtutil”

Installing RCP (only for Dos users)

2.In the DOS prompt C:\>, type “xcopy d:\5200\eng\rcp\*.* c:\prtutil”

2.In the DOS prompt C:\>, type “xcopy d:\5200\eng\rcp\. c:\prtutil”