The remote control panel dialog box includes 7 tabs.
PRINTER
•Timeout
Determines the amount of time in seconds the printer waits before printing the last page of a print job that does not end with a command to print the page.
•Power save
Determines the length of time the printer waits after a job is printed before it goes to a reduced power state. If the printer is used constantly, select OFF which keeps the printer ready to print with the minimum
•Auto continue
Determines what action the printer should take when a manual feed print job is sent to the printer and there is no paper in the manual feeder. If set to ON, the printer will pick up the paper from the automatic feeder after ten seconds. Otherwise, the printer will wait for you to load paper in the manual feeder.
•Jam recovery
If paper jams as it exits to the output bin, the data on the jammed page will be lost. If you set this feature to ON, the printer keeps the image for a printed page until the printer signals that the page has successfully exited the printer. The printer reprints all jammed pages. With this feature OFF, the printer does not reprint a page that has jammed.
•Econo mode
To get the most from your toner supply, set this mode to ON. With this mode ON, print quality may be reduced.
PAGE
•Paper size
Sets the paper size.
•Copies
Sets the number of copies printed for each page.
•Orientation
Determines how the printing is oriented on the page.
•Paper type
Allows you to specify the type of print material installed in each paper source.
