Basic tab
Menu Option | Functions |
|
|
Copies | Sets the number of copies to be printed for each |
| page. |
|
|
Paper orientation | Sets the orientation (printing direction) of the |
| print media. Select Landscape to run the |
| printing parallel to the short edge of the print |
| material. Select Portrait to run the printing |
| parallel to the long edge of the print material. |
|
|
Paper size | Allows you to set your printer’s default input |
| tray or option. The default selection is Automatic |
| Feeder. Select Manual Feeder when manually |
| feeding a sheet of print material through the |
| manual feeder. For information on the manual |
| feeder, see page 2.8. |
|
|
Paper source | Sets the print media size. The list box provides a |
| summary of all the paper sizes supported by the |
| printer driver and printer combination. |
|
|
Paper type | Selects the type of print material, like Plain |
| Paper, Envelope, Transparency and so on |
| installed in each paper source. If you use thick |
| paper, set this to Bond. If you use card paper, set |
| this to Card Stock. If you use colored paper |
| having pigment or dyes as a part of the paper |
| manufacturing process, set this to Colored |
| paper. Select Letterhead for the paper having |
| preprinted logo or text located at the top of the |
| page, Preprinted for forms having some type of |
| printing on them before they are sent through the |
| printer. |
|
|
Graphic tab
Menu Option | Functions |
|
|
Resolution | For best results, set this to 600 dpi. For faster |
| printing and smaller memory requirements (and |
| a lower quality), use 300 dpi instead. |
|
|
Toner save mode | When this box is checked, the printer uses less |
| toner to print the document. The output is a little |
| lighter but the life of the toner cartridge is |
| extended. |
|
|
