7.Type the partition size in the blank of 'Enter partition size in Mbytes or percent of disk space (%) to create a Primary DOS Partition...:[ ]' and press Enter. (HDD size) - (Save-To-Disk Partition + 5MB)

Eg.) Partition size for 6.4 GB HDD = 6250 - (140 + 5) = 6105

8.Finish the Fdisk by <Esc> key and press the power button to reboot the system.

To create PHDISK

1.Set the system boot with CD-ROM, press <F8> key to boot with “Command prompt only”.

2.Operate Phdisk.exe as follows.

3.Type ‘E:\sysutil>phdisk /c 143360 /p’ and press Enter.

143360 is calculated as below formula, and it could be different according to system memory.

143360={system memory(64MB) + video memory(8MB) + extended memory(64MB) + buffer space(1MB)}x1024

4.Press any key to restart the system.

To format the HD

1.Boot system by CD-ROM.

2.Operate Format.exe, type ‘A:/format c: /s’ and press Enter.

3.Warning message saying all the data will be removed shows, type Y for 'Proceed with Format (Y/N)?' and press Enter.

4.Type the drive label and press Enter.

To install Windows and each device drivers

Use System Recovery CD to install Windows and System Software CD to install devices’ drivers.

68 Creating a Save to Disk Partition