1

ON

2

 

Figure 22. Setting the switch on 2nd HDD

CD-ROM Drive

If your system did not ship with a CD-ROM drive included, you can order a drive. See ”Using the CD-ROM Drive” on page 27 for directions on installing the CD- ROM drive.

To install and use the CD-ROM drive in the Flex-Bay, you must set the switch on a device to set it as slave type of IDE bus. Set switch 1 toON and switch 2 to ON. See ”Using the Flex-Bay” on page 23 for information on installing a device in the Flex-Bay.

 

2

ON

1

Figure 23. Setting the switch on CD-ROM drive

Using Options 89