2.Using a screwdriver, remove the screw that holds the memory-module compartment door in place (Figure 19).

Socket 2

Socket 1

Figure 19. Removing the Memory Module Compartment Door

3.Grasp the edge of the door and pull the door off the chassis.

4.Remove installed modules if necessary:

When removing modules, pull on the plastic portion of the connector slots tabs only. Do not pull on the metal part of the tabs, or you may damage the tabs.

a.Pull the tabs on the connector slot outward slightly, until the edge of the memory module pops up (Figure 20).

Tab

Tab

Figure 20. Removing a Memory Module

b.Hold the memory module by the edges and pull it forward out of the compartment.

5.Align the connector on the memory module with the connector of the slot.

Using Options 87