In command mode, you can call by using AT commands and communicate with others by connecting to other modems. You can call this status Data mode or Online mode. In data mode, You can't use any AT commands except the +++

command, which has +++ at the head.

If you stop communication and disconnect the phone, the Fax modem will run in command mode again.

Using Command Mode during Communications

Sometimes, you have to use AT command while you're communicating with others via modem. In this case, you can use +++ command for AT command without hanging up your telephone. Pressing '+' three times makes fax mode change to command mode. Of course, the telephone is not disconnected. (Don't enter Enter key after input +++)

Connection may be lost depending on the server.

If you want return to Data mode from command mode, you only have to input ATO and press the Enter key to start the communications again.

The mode can not be transfored from the command mode to data mode depending on the server.

Using AT commands

AT commands can be used in the following way. There's no difference between capital letters and small letters, and all commands should include 'AT' as a prefix except ones, which includes 'A/' instead.

Also, Carriage Return saved in the S3 register should be entered in order to sign the end of the command.

AT command

Press Enter key

Example: ATDT 123-4567 Press Enter and the model dials to 123-4567

Display the result value

After entering AT commands, the result value is displayed on the screen.

46 Using the Modem