
ENGLISH
ESPAÑOL
How to Use the Battery Pack | Uso de la batería |
Charging the Battery Pack
1.Slide [Mode Selector] up to turn the CAM off.
2.Attach the Battery Pack to the CAM.
3.Fix the CAM into the cradle.
4.Connect the AC power adapter to the DC In jack on the cradle.
◆You can detach the AC adapter by pressing the buttons on the sides of the adapter cable plug while pulling it out.
5.Insert the AC power adapter into the outlet.
Carga de la batería
Charging through the cradle | 1. Deslice el [Selector de modalidad] | |
|
| hacia arriba para apagar la CAM. |
| 2. | Conecte la batería a la CAM. |
| 3. | Coloque la CAM en el soporte. |
| 4. | Conecte el adaptador de CA a la |
|
| toma de entrada de CC del soporte. |
|
| ◆ Puede desconectar el adaptador de |
|
| CA pulsando los botones situados en |
|
| los laterales del enchufe del cable |
|
| del adaptador mientras tira hacia |
|
| fuera. |
| 5. | Inserte el adaptador de CA en la |
|
| toma de la pared. |
Note
Charging directly to the CAM
Nota
✤You can also charge the battery pack when you use the CAM by connecting the AC power adapter to the CAM directly.
Warning
✤It is recommended you fully charge the battery pack before use.
✤You should only charge the battery in
an environment between 32°F and 104°F.
✤También puede cargar la batería cuando utilice la CAM conectando directamente el adaptador de CA a la CAM.
Advertencia
✤Se recomienda cargar totalmente la batería antes de utilizarla.
✤Debe cargar la batería únicamente en un ambiente entre 0°C y 40°C.
24