MAINTAINING THE CARTRIDGE
Toner cartridge storage
To get the most from the toner cartridge, keep the following guidelines in mind:
•Do not remove the toner cartridge from its package until ready for use.
•Do not refill the toner cartridge. The machine warranty does not cover damage caused by using a refilled cartridge.
•Store toner cartridges in the same environment as your machine.
•To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes.
Expected cartridge life
The life of the toner cartridge yield depends on the amount of toner that print jobs require. The actual number may also be different depending on the print density of the pages you print on, and the number of pages may be affected by operating environment, printing interval, media type, and media size. If you print a lot of graphics, you may need to change the cartridge more often.
Redistributing toner
When a toner is low, faded or light areas may appear. You can temporarily improve print quality by redistributing the toner.
•The
•The SmartPanel program window appears on the computer telling you which cartridge is low on toner.
1.Completely open the front cover.
• Do not touch the green surface, the OPC drum or the front of the toner cartridge, with your hands or any other material. Use the handle on each cartridge in order to avoid touching this area.
•Be careful not to scratch the surface of the paper transfer belt.
•If you leave the front cover open for more than a few minutes, the OPC drum can be exposed to light. This will cause damage to the OPC drum. Close the front cover should the installation need to be halted for any reason.
2.Grasp the handles on the toner cartridge and pull to remove the cartridge from the machine.
3.Holding both handles on the toner cartridge, thoroughly rock it from side to side to evenly distribute the toner.
If toner gets on your clothing, wipe it off with a dry
cloth and wash it in cold water. Hot water sets toner into fabric.
4.Slide the toner cartridge back into the machine.
5.Close the front cover. Make sure the cover is securely latched.
If the front cover is not completely closed, the machine will not operate.
Maintenance_ 59
