DR300 Operator Manual | Chapter 4 - Setting of Label and Carbon Ribbon |
|
|
Cutter Replacement
Replace cutter unit when blade becomes blunt and cut edges are rough. (Please contact the sales outlet where you purchase the DR300.)
•Paper thickness 0.1 mm – 0.26 mm
•Accuracy of cuts is ± 1.5 mm
•Paper pitch 25 – 181 mm
•± 1 mm from perforation is
Stacker Option
Stacker
•Set Stacker in front of the cover of the printer main body as shown in the following drawing.
•Attach the stacker to the front cover of the printer main body as shown in the arrow direction.
Stacker
23
