SATO DR300 manual Factory Mode NON ALL, HED, CUT Print, NON ALL Head CUT

DR300 Operator Manual Chapter 8 - Operation Panel

[10] Factory Mode

FACTORY

MODE

FACTORY

NON

ALL, HED, CUT

FACTORY

PRINT

To enter this mode, set DIPSW 2-5 to ON position. Open thermal print head, power on while pressing both <FEED> and <LINE> keys. Release both keys when buzzer beeps. The LCD display will show “HEAD OPEN” message, close the thermal print head and “FACTORY MODE” will be displayed. Set DIPSW 2-5 top OFF position.

NON ALL HEAD CUT

Press <LINE> key to confirm the clear item.

Press <FEED> key to print a test sample.

Press <FEED> key to stop/pause printing.

45