DR300 Operator Manual | Chapter 4 - Setting of Label and Carbon Ribbon |
|
|
Basic Usage of Stacker
•First adjust the scale position (inclination of bottom plate) corresponding to the size of paper by loosening the stacker screw.
•Adjust the according to the label pitch for a good collecting position.
•The number of sheets that can be stacked varies with the scale position and paper thickness.
Stack Position Adjustment, Standard Pitch Tag (Tag with pitch greater than 40mm)
•Set stacker scale in between from [Standard pitch] to [Large pitch].
•Determine Tag Guide position by matching with the size of tag to be cut.
Tag Guide Set Position
When setting Tag Guide, set it with space of approximately 3mm on printer main body side and approximately 3mm on side of Tag as shown in the following drawing.
24
