SATO DR300 manual Stx, Etx, Command summary Detail Description, Initial Designation Command

DR300 Operator Manual Chapter 9 - Online Programming

Command images are as follows:

STX Initial designation

Command

Printing Designation

ETX End designation

COMMAND SPECIFICATION

1) Command summary

Command	Detail	Description
<A>		Designates start of data transmission.
<M>	d d	Designates information concerning the entire printing, such as paper
		information, etc.
<L>	d d	Designates transmission of field parameter.
<D>	d d . .	Designates transmission of field data.
<Q>	d d d d	Designates No. of labels to be issued.
<ID>	d d	Designates printing ID (Status-3 only).
<GM>	d d	Designates graphic data (BMP).
<T1H>	d d	Custom designed character registration (16x16).
<T2H>	d d	Custom designed character registration (24x24).
<Z>		Designates end of data transmission.

2) Initial Designation Command

STX <A> [02 H, 1B H, 41 H]

Command shows start of data transmission.

Communication error and transmitted data before reception of this command will be ignored.

*For errors, like receiving uncontrollable symbol in case circuit on the host side is open/ closed, no error message will be displayed until error reception reaches 500 times.

3) End Designation Command

<Z>, ETX [1 BH, 5 AH, 03 H]

Command shows end of the data transmission.

Transmit media information, field information, print quantity, before transmitting this command.

47