DR300 Operator Manual | Chapter 5 - Power Supply |
|
|
CHAPTER 5
Power Supply
Setting Power Supply
Plug in power cable to main body socket then the outlet socket.
Supply Power
Turn power switch on. Push the switch on the side labelled
When the power is switched on, initial startup message [Manual Print Mode] is displayed on the touch screen.
Switch off Power Switch
The following must be done before power off:
•Confirm printer is not in action (idling).
•Stop or pause any printing process before power off.
Do not operate power switch or plug in / out power cable with wet hands to avoid electrocution.
26
