SATO DR300 manual Setting Non-Standard Protocode, Code ADJ

DR300 Operator Manual Chapter 8 - Operation Panel

TME 0 0 : 0 0 8 0 / 0 1 / 0 1

FEED key

TME 0 0 : 0 0 8 0 / 0 1 / 0 1

FEED key

TME 0 0 : 0 0 8 0 / 0 1 / 0 1

FEED key

TME 0 0 : 0 0 8 0 / 0 1 / 0 1

FEED key

SERVICE

LVL SET

**Time (hour, minute, second) can incremented by pressing <LINE> key and confirm by pressing <FEED> key.

[8]Setting Non-Standard Protocode

1)Power on printer while holding down <LINE> and <FEED> keys.

DEFAULT

NO YES

2)Push <FEED> key 2 times and <LINE> key 5 times.

CODE ADJ

3)It advances to non-standard code setting by pushing <FEED>. Key. STX is displayed first. The displayed data at this time becomes presently set code data. (Setting sequence is STX-ETX-ESC-ENQ-CAN)

CODE ADJ

STX : 7 B

42