SATO DR300 manual Stack Position Adjustment, Small Tag Less than 35mm, Tag Guide Position

Models: DR300

1 96
Download 96 pages 806 b
Page 27
Image 27

DR300 Operator Manual

Chapter 4 - Setting of Label and Carbon Ribbon

 

 

Stack Position Adjustment, Small Tag (Less than 35mm)

Set Stacker scale in between from [Standard pitch] to [Small pitch].

Set Guide Plate to stacker as shown in the following drawing. This Guide Plate prevents overturning when small pitch tag is issued.

Determine Tag Guide position by matching to the size of tag to be cut.

Tag Guide Position

When setting Tag Guide, set it with space of approximately 3mm on printer main body side and approximately 3mm on side of Tag as shown in the following drawing.

25

Page 27
Image 27
SATO DR300 manual Stack Position Adjustment, Small Tag Less than 35mm, Tag Guide Position