DR300 Operator Manual | Chapter 6 - Daily Maintenance |
|
|
CHAPTER 6
Daily Maintenance
This equipment is for printing information in the form of bar code and character. Periodical preventive maintenance is recommended to keep the printer in good condition.
Frequency for maintenance
•Thermal head, platen roller
After printing every one roll or 150m of label.
•Others
After printing every 6 rolls or 900m of label.
Caution for maintenance (take the following precaution in maintenance work)
•The above recommended cleaning frequency is just a guide. Do carry out any cleaning where dirt or dust has gathered.
•Use applicator and cotton wool for cleaning each component. Avoid metallic tools to prevent damage to printer parts especially print head.
•Ensure that power is switched off before performing any cleaning.
Maintenance Method
•A cleaning kit is available from SATO. This contains:
1.Solvent wipes (for print head)
2.Multi purpose wipes
3.Air duster
This will help to keep your printer in working condition.
30
