DR300 Operator Manual | Chapter 8 - Operation Panel |
|
|
[3] User Mode
Setting of print darkness, speed, offset adjustment can be done in this mode. To enter this mode, power on printer while holding down <LINE> key.
USER
MODE
FEED key
DARKNESS
L 1 2 3 4 5 D
FEED key
SPEED 1 2 3
FEED key
V.OFFSET V : ± 0 0 0 0
FEED key
V.OFFSET V : + 0 0 0 0
FEED key
H.OFFSET H : ± 0 0 0
FEED key
H.OFFSET H : ± 0 0 0
FEED key
DARKNESS
L 1 2 3 4 5 D
Press <LINE> while power on printer, buzzer sounds and press <FEED> key to proceed to next setting.
<LINE> key | : | cursor movement |
<FEED key> | : | confirm darkness selection |
<LINE> key | : | cursor movement |
<FEED> key | : | confirm speed selection |
<LINE> key | : | + or - sign selection |
<FEED> key | : | confirm sign selection |
<LINE> key | : | increment offset value |
<FEED> key | : | confirm vertical offset selection |
<LINE> key | : | + or - sign selection |
<FEED> key | : | confirm sign selection |
<LINE> key | : | increment offset value |
<FEED> key | : | confirm horizontal offset selection |
* Display returns to Darkness selection.
Set Value | 1 | 2 | 3 |
DR300 | 75mm/s | 100 mm/s | 125mm/s |
37
