Maintenance
123
9. Maintenance
4Take a sheet of clean paper and roll it
into a tube. Roll it tightly so that the
diameter of the holes at each end is
less than the thickness of your little
finger.
6Replace the drum cartridge.
To insert the cartridge, align the
guides on the cartridge with the
runners on the sides of the
compartment.
7Replace the toner cartridge and close
the print compartment cover. (Refer
to Installing the Toner Cartridge in
Chapter 1.)
5Gently wipe the surface of the drum
with the rolled-up paper to remove
any particles of toner caked on the
drum.
Do not let the drum surface com e
into contact with anything other
than the rolled-up paper.
Fingerprints, water, alcohol, and
other solvents will damage the
drum surface.
Do not touch the drum surface with
the edges of the rolled-up paper.
all-fo2950.book Page 123 Monday, September 25, 2000 8:57 AM