Sharp FO-2950M operation manual Searching for an auto-dial number

Sending a Fax by Automatic Dialing

Searching for an auto-dial number

If you don’t remember the Rapid Key or Speed Dial number in which you have programmed a particular fax number or E-mail recipient, you can search for the number by following the steps below. Once you have found the number, you can dial and transmit the loaded document by simply pressing the START key. (Note: To search for an E-mail recipient, your fax must be connected to your computer.)

1 Load the document(s).

• SEND READY will appear in the display.

	• Set the resolution and/or contrast if	RESOLUTION
	desired.
2	Press the HOLD/SEARCH key.	HOLD/
		SEARCH
3	Press 1 to search for an auto-dial	AUTO-DIAL	E-MAIL
	number, or 2 to search for an E-mail	1 or	2
	recipient.

2. Sending Documents

4 Enter the first letter of the stored name by pressing the appropriate number key (the key below the marked letter) one or more times until the letter appears in the display. If the name begins with a special character or number, press 1 (only for auto-dial numbers).

ABC DEF

1 2 3

GHI JKL MNO

4 5 6

PQRS TUV WXYZ

7 8 9

0

♦If you don’t remember the first letter, go to Step 5 (you will scroll through the list from the beginning).

♦If a name wasn’t stored (for an auto-dial number), press 0. This will cause numbers, not names, to appear when you scroll.

61