Sending a Fax by Automatic Dialing
8 Press 1 if the number programmed is an area code or access code to be used for Chain Dialing (see Chain Dialing for area and access codes below).
Press 2 (or START) if the number is a regular fax or voice number.
ON OFF
1 or 2
2. Sending Documents
9 Return to Step 3 to store another
STOP
number, or press the STOP key to Step 3 or return to the date and time display.
Chain Dialing for area and access codes
You can also program an area code or access code in a Rapid Key or Speed Dial number using the above programming procedure. In Step 8, press 1 to set the number as a Chain Dialing number.
After you dial an area code or access code using a Rapid Key or Speed Dial number set for Chain Dialing, the fax machine will wait for you to dial the remainder of the number (you can dial the remainder of the number by pressing a Rapid Key, by pressing the Speed Dial key and entering a Speed Dial number, or by pressing numeric keys). Note that the remainder of the number should not be set as a Chain Dial number if programmed in a Rapid Key or Speed Dial number.
♦The maximum number of digits that can be dialed at one time by Chain Dialing is 50.
Clearing auto-dial numbers
1 Press these keys:
FUNCTION
3
The display will show:
FAX/TEL # MODE 1=SET,2=CLEAR
55
