Sending a Fax by Automatic Dialing
60
Direct Keypad Dialing
You can also enter a full number with the number keys and then press
the START key to begin dialing. You can use this method to dial a full
number when you don’t need to speak to the other party before faxing.
1Load the document(s). (Note: If
desired, you can load the document
after dialing in Step 2, below.)
•SEND READY will appear in the
display.
•Set the resolution and/or contrast if
desired.
2Enter the number of the receiving
machine by pressing the numeric
keys.
•If a pause is required between any
of the digits to access a special
service or an outside line, press the
REDIAL key (two seconds per
pause). The pause will appear as a
hyphen. Several pauses can be
entered in a row.
3Check the display. If the number of
the receiving machine shown is
correct, press the START key.
•If it is not correct, press the STOP
key to backspace and clear one
digit at a time, and then re-enter the
correct digit(s).
(Example)
467
5
32 2
START
RESOLUTION
all-fo2950.book Page 60 Monday, September 25, 2000 8:57 AM