Loading Printing Paper
22
6Push the paper release lever back
down.
Note: If the paper does not feed
correctly, remove the entire stack
from the tray and repeat the loading
procedure from the beginning.
Important:
Be sure to load the paper so that printing takes place on the print side of
the paper. Printing on the reverse side may result in poor print quality.
4Insert the stack of paper firmly into
the tray, print side up.
Make sure that the stack is not
higher than the marked line.
Loading too much paper may cause
paper jams and misfeeds.
If paper remains in the tray, take it
out and combine it into a single
stack with the new paper before
adding the new paper.
5Make sure the stack of paper is
aligned against the right paper guide,
and then gently move the left paper
guide to the 8 1/2 position for letter or
legal paper, or the A4 position for A4
paper.
all-fo2950.book Page 22 Monday, September 25, 2000 8:57 AM