Timer Operations
109
7. Special
Functions
To cancel a timer operation
If you need to cancel a timer operation after it has been set, follow the
steps below.
1Press these keys:
The display will show:
2Press 2 to select CLEAR.
3Enter the 1-digit number assigned to
the timer job you want to cancel.
If you don’t remember the number,
print out the Timer List as
explained in Chapter 8.
4Press the START key and then the
STOP key.
12 Press the START key.
If this is a transmission, the
document is scanned into memory.
START
TIMER MODE
1=SET, 2=CLEAR
1
FUNCTION
2
1
(Example)
START STOP
11 Adjust the resolution and/or contrast
if desired (skip to the next step if you
don't want to change settings).
RESOLUTION
all-fo2950.book Page 109 Monday, September 25, 2000 8:57 AM