Sending a Fax by Automatic Dialing
Dual Access
The fax machine features full dual access, which means that you can load a document and dial by automatic dialing even when the fax machine is occupied with another operation. After you dial, your document will be immediately scanned into memory and then transmitted once all previously set operations have been completed.
If more than one document has been scanned into memory for transmission, the documents will be transmitted in the order in which they were scanned.
♦The fax machine can hold approximately 110 pages of average content in memory. Less pages can be held if any pages are scanned using fine or halftone resolution.
♦The maximum number of transmission jobs that can be held at once is 30.
♦The amount of memory currently occupied appears as a percentage (M:00%) in the display.
If the memory becomes full...
If the memory becomes full while a document is being scanned, MEMORY FULL will appear in the display. Press the START key or the STOP key as follows:
♦Press the START key if you want to transmit the pages which have been stored up to that point in memory. The remaining pages will be ejected from the feeder. After transmission, the memory will be cleared and you can transmit the remaining pages. You will also need to transmit the page which was being scanned when the memory filled up.
♦Press the STOP key if you want to cancel the entire transmission.
2. Sending Documents
57
