Sharp FO-5700 Entering and Using Programs, Rapid Key that has not yet been Programmed, 119

all-FO4700.book Page 119 Friday, October 8, 1999 11:10 AM

Entering and Using Programs

Entering and Using Programs

If you frequently perform the same operation involving the same party, you can program all the steps of the operation into one Program Key. This allows you to perform the operation by simply pressing that key.

♦Any Rapid Key which is not already programmed as a Rapid Key or a Group Key can be used as a Program Key.

♦You can also include a timer setting in the program to have the operation performed automatically at a selected time.

♦To clear a mistake, press the STOP key.

Initial procedure

To program a Program Key, first perform the following procedure. After you have completed this procedure, go to the procedure for the specific operation you want to program (see the following pages).

1 Press these keys:	FUNCTION	1
The display will show:	7
1:PROGRAM ENTRY MODE
1=SET, 2=CLEAR

5. Special Functions

2

3

Press 1 to select SET.

1

Select a Program Key by pressing any

Rapid Key that has not yet been	2
programmed.	B

(Example)

119