Sharp FO-4700, FO-5700 Serial Polling using a Group Key, Being polled Memory polling

all-FO4700.book Page 92 Friday, October 8, 1999 11:10 AM

Polling

•Enter one or more full fax numbers with the numeric keys, pressing the START key after each full number.

3 Press the START key. Reception will begin.

START

Serial Polling using a Group Key

If the fax machines you want to poll have all been programmed into one Group Key, you can poll them by simply pressing that Group Key. (The procedure for programming Group Keys is explained in Broadcasting in this chapter.)

♦Make sure no documents are in the feeder before you press the Group Key.

Being polled (Memory polling)

To let another fax machine poll your fax machine, you must first store the document(s) in memory using the following procedure. Transmission will take place when the other fax machine calls your fax machine and activates polling. You can choose whether to allow polling only once, or an unlimited number of times. In the latter case, your fax machine can be used as an electronic "bulletin board".

♦Multiple documents can be stored for memory polling. To add a document to others already stored, simply repeating the storing pro- cedure (note that if Department Control is activated, documents cannot be added by a department other than that which stored the first document). When polling is initiated, the polling machine will receive all documents stored.

♦If you allow polling only once, the document(s) will be automati- cally cleared from memory after polling. If you allow polling an unlimited number of times, the document will remain in memory until you clear it as explained in the following section, Clearing a document.

92