Siemens CS 275 manual Connection of remote bus cables, C45197-A114-C330, Cable plug SPN684732-00

This catalog is out of date, see note on page 2

Connection of remote bus cables

It may be necessary when using remote bus cables to connect sections together. The type of connection differs depending on the type of cable:

Standard remote bus cable V45466-D21-B35 and in-house

cable V45466-D17-B135

These cables can be connected by splicing or by using RF plugs.

Remote bus cables V45466-D21-B65 and -B55

Only splicing is possible for connecting these cables. To pro- vide additional protection against mechanical damage, the con- nection should be enclosed in a metal sleeve. The cable ar- mouring can be electrically connected using a copper cable (e. g. as additional overvoltage protection) and secured to pre- vent tension. The sleeve is filled with sealing compound follow- ing assembly.

All parts required for the connection, both for the cable connec- tion itself and also the sleeve and sealing compound, can be obtained as a parts kit for splicing coaxial cables. Instructions are included with the kit.

Ordering data

	Order No.
For remote bus cables V45466-D21-B35 and
V45466-D17-B135:
Parts kit for splicing coaxial cables	S45056-M125-A1
(1 kit is required per connection point)
Al-foil,50 mm wide, 250 mm long;	C45197-A114-C330
package with 100 foils
(2 off required per connection point)
Cable plug 4.6-16	SPN:684732-00
(2 plugs required per connection point)
Coupling	SPN:683500
Heat-shrinkable sleeve, length approx. 250 mm	5GF2603
Al foil, 50 mm wide, 250 mm long;	C45197-A114-C330
package with 100 foils
(2 off required per connection point)
For remote bus cables V45466-D21-B65 and
V45466-D21-B55:
Parts kit for splicing coaxial cables	S45054-A271-A1
(1 kit is required per connection point)
Al foil, 50 mm wide, 250 mm long,	C45197-A114-C330
package with 100 foils
(2 off required per connection point)

Siemens PLT 130 . 1994 4/19