|
| OPERATION 6 |
| SITRANS FX300 | |
|
|
|
6.5 Menu structure
6.5.1 Overview of firmware versions
There are three firmware versions, each of which is tailored to a different use of the measuring device:
•Basic: liquids and gases without compensation, saturated steam with density compensation using the temperature
•Steam: saturated and superheated steam with density compensation using pressure and temperature, gross heat meter
•Gas: gas, gas mixture and wet gas with density compensation using pressure and temperature, FAD (free air delivery measurement)
The menu structures differ from one another depending on the firmware version.
The following table contains an overview of all menu items in the first menu level. For a complete description of the menu, note the firmware version of your measuring device and follow the relevant instructions in the table.
Menu items | Firmware version | Firmware version | Firmware version | |
|
| Basic | Steam | Gas |
|
|
|
|
|
1. | Quick setup | refer to Menu item Quick Setup on page 49 |
| |
|
|
|
| |
2. | Tests | refer to Menu item Tests on page 50 |
| |
|
|
|
|
|
3. | Setup | refer to Menu item | refer to Menu item | refer to Menu item |
|
| Setup (firmware version | Setup (firmware version | Setup (firmware version |
|
| - basic) on page 51 | - steam) on page 54 | - gas) on page 58 |
|
|
|
|
|
5. | Service | The service menu is only accessible to service personnel and is not described. | ||
|
|
|
|
|
Table
INFORMATION!
The measuring device has been preset at the factory in accordance with the customer order. Therefore, subsequent configuration via the menu is only necessary if the intended use of the measuring device changes.
06/2009 - SFIDK.PS.050.F2.02 A5E02100423 | www.siemens.com/flow | 47 |
