Siemens FX300 manual Pressure, temperature and density

	OPERATION 6
SITRANS FX300

Level	Designation	Selection / entry		Explanation
3.5				Pressure, temperature and density
3.5.1	T-sensor			Internal temperature sensor
	→
		No ↑...		No temperature sensor available
		Yes	↑...^	Temperature sensor available
3.5.2	P-sensor			Pressure sensor
	→
		Intern ↑...		Internal pressure sensor
		---	↑...^	No pressure sensor available
3.5.4	Temp. Opr.			Operating temperature
	→
		°C	↑...^	Set temperature unit
		Unit
		0000000.0		Operating temperature
		°C ^
		Disp. on /		Display temperature /
		Disp. off ↑...^		Do not display temperature
3.5.5	Pres. Opr.			Operating pressure
	→
		Pa	↑...^	Set pressure unit
		Unit
		0000000.0		Operating pressure
		Pa ^
		Disp. on /		Display pressure /
		Disp. off ↑...^		Do not display pressure
3.5.6	Dens. Opr.			Density at operating pressure and operating
				temperature
		kg/m3		Set density unit
		Unit	↑...^
		00011.0000		Operating density
		kg/m3 ^
3.5.7	Temp.Norm .	00000020.0		Enter normal temperature
	(available if Maes.Inst =	°C ↑…↑...↑...^		Unit as 3.5.4
	Norm. Vol., see menu
	item 1.1.3)
3.5.8	Pres.Norm	00000000.0		Enter normal pressure
	(available if Maes.Inst =	Pa ↑…↑...↑...^		Unit as 3.5.5
	Norm. Vol., see menu
	item 1.1.3)
3.5.9	Dens. norm	00001.2900		Enter density for reference conditions (pressure and
	(for unknown gases using	kg/m3 ^		temperature)
	standard volume flow
	measurement, see menu
	items 1.1.3, 3.4.1 and
	3.4.2)
3.5.10	P-Excit. V	0005.00000		Exciting voltage of pressure sensor
	(available if P-Sensor =	V ^
	Internal, see menu item
	3.5.2)
3.5.11	P-Sen.P1V1			Pressure sensor:
	(available if P-Sensor =			1st calibration point
	Internal, see menu item
		0001.00000
	3.5.2)
		P1 kg/cm2g ↑…↑...
		↑...^
		0002.00000
		V1 mV ↑…↑...↑...^

06/2009 - SFIDK.PS.050.F2.02 A5E02100423 www.siemens.com/flow 61