Siemens Module B3 manual Automation and Drives SCE

Automation and Drives - SCE

7.Open the hardware catalog.

Here, all racks, modules, and interface modules for configuring your hardware, are provided arranged in the directories: PROFIBUS-DP, SIMATIC 300, SIMATIC 400 and SIMATIC PC Based Control.

Click on the symbol for 'HW catalog’

8.Insert mounting channel (→ SIMATIC 300 → RACK-300 → Mounting channel).

Click on 'Mounting channel'

Then a configuration table is displayed automatically for configuring Rack 0.

	Preface Fundamentals	Discontinuous Action Controllerr	Controller Block (S)FB41	Setting the System Appendix
	T I A Training Document	Page 43 of 64		Module
				B3
Issued: 02/2008				Control Engineering with STEP 7