Automation and Drives - SCE
10.Note down the addresses of the IO modules (addresses are assigned automatically and tied to the slot).
For our example, change the addresses to the values PEW 128 and PAW 128.
Save the configuration table and load it to the PLC (key switch on CPU has to be on Stop!)
Click on symbol ‘Save and convert’
Click on symbol ‘Load to AS’
Double click on line "AI5/A02, then
11. Highlight Blocks in SIMATIC Manager
Click on 'Blocks'
|
|
|
|
|
|
|
| Preface Fundamentals | Discontinuous Action Controllerr | Controller Block (S)FB41 |
| Setting the System Appendix |
|
|
|
|
|
|
|
|
| T I A Training Document | Page 45 of 64 | Module | |||
|
|
|
|
| B3 | |
Issued: 02/2008 |
|
|
| Control Engineering with STEP 7 | ||
