Siemens S450 IP Making cost-effectivecalls, Displaying the call duration, Linking call-by-callnumbers with a number, Displaying CNIP information, Selecting from the calls list

Managing entries in the calls list

After pressing the display key §Options§ you can select more functions with q:

Copy to Directory

Copying a displayed number to the directory.

Information

If a URI was received and stored for a VoIP call, this will be shown. The URI is dialled if you press the talk key c. The URI is not entered on the last number redial list.

See also the following section 'Display- ing CNIP information'.

Delete List

Delete complete list.

When you leave the calls list all entries are set to the status 'old', i.e. the next time you call the list up they will no longer be shown in bold.

Displaying CNIP information

If you have CNIP, you can display the name and town that is registered with your network provider for this number.

You have selected a list entry.

§Options§ Open menu.

Information Select and press §OK§.

If the name and town are not shown, it means that the caller has not requested Calling Line Identification or that Calling Line Identification has been withheld.

Press §OK§ to return to the list.

Selecting from the calls list

f ¢Calls List: (2)

q Select entry.

c Briefly press/press and hold the talk key. The number is dialled using the selected connection type (page 20).

Making cost-effective calls

Making cost-effective calls

Using the Internet (VoIP) is the preferred cost-effective way of making calls. If you make calls via the fixed network, select a network provider who offers very low call charges (call-by-call) or have the call duration displayed on your handset after the call. You can manage call-by-call numbers in the call-by-call list

Displaying the call duration

The duration of a call is displayed

uduring the conversation,

uuntil about three seconds after the call has ended if you do not replace the handset in the charging cradle.

Please note:

The actual duration of the call can vary from that shown by a few seconds.

Linking call-by-call numbers with a number

You can insert the dialling code of a network provider ahead of the number ('linking').

C	Open call-by-call list.
s	Select entry (call-by-call
	number).
§Options§	Press the display key.

Display Number

Select and press §OK§.

~ / s Enter number or dial number from the directory (page 32).

c Press the talk key. Both numbers are dialled.

35