SMS on a PABX

uYou can only receive an SMS when the Calling Line Identification is for- warded to the extension of the PABX (CLIP). The CLIP of the phone number for the SMS centre is evaluated in your Gigaset.

uIf required, you must prefix the number for the SMS centre with the access code (depending on your PABX).

If in doubt, test your PABX, e.g. by sending an SMS to your own number: once with and once without the access code.

uWhen you send SMS messages, your sender number may be sent without your extension number. In this case the recipient cannot reply to you directly.

Sending and receiving SMS on ISDN PABXs is only possible via the MSN number assigned to your base station.

Activating/deactivating

SMS function

If you deactivate the SMS function, you cannot send or receive SMS messages with your phone.

The settings which you have made for sending and receiving SMS messages (e.g. the call numbers of the SMS centres) and the entries in the incoming and draft message lists are saved even after you switch off your phone.

vOpen menu.

5 5O 2L

Enter the digits.

Q §OK§ Deactivate SMS function.

Or:

1 §OK§ Activate SMS function (default

settings).

SMS (text messages)

SMS troubleshooting

Error codes when sending

E0 Calling Line Identification permanently withheld (CLIR) or Calling Line Identification not activated.

FE Error occurred during SMS transfer.

FD Connection to SMS centre failed, see self- help.

Self-help with errors

The following table lists error situations and possible causes and provides notes on troubleshooting.

43