Using several handsets
Caution!
–You should always check the operation of the room monitor before use. For example, test its sensitivity. Check the connection if you are diverting the room monitor to an outside number.
–When the function is switched on the hand- set's operating time is severely reduced. If necessary, place the handset on the base station. This ensures that the batteries do not run down.
–Ideally the handset should be positioned 1 to 2 metres away from the baby. The micro- phone must be directed towards the baby.
–The connection to which the room monitor is diverted must not be blocked by an acti- vated answer machine.
Activating the room monitor and entering the number to be called
v¢íAdd. Features ¢Room Monitor
¤ Change multiple line input:
Room M.:
Select On to activate.
Call to:
Press the display key §Edit§ and enter destination number.
External number: Select number from the directory or enter directly. Only the last 4 characters are displayed.
Internal number: Delete any stored external number. §INT§ s (select handset or Call All, if all registered handsets are to be called) §OK§.
Store number with Save.
Level:
Set noise level sensitivity (Low or High).
¤Save changes (page 101).
The function is now activated. With v, you can move directly to settings.
Please note:
An external number will be dialled via the set standard connection (VoIP or fixed network). If the number is to be dialled via the nonstandard connection, enter a star (*) at the end of the number.
Changing previously set external destination number
¢Room Monitor
s Scroll to the Call to: line.v ¢íAdd. Features
§Edit§ | Press the display key. |
X | Delete existing number. |
¤ Enter number as described in "Activat- ing the room monitor and entering the number to be called" (page 60).
¤ Save changes (page 101).
Changing previously set internal destination number
¢Room Monitor
s Scroll to the Call to: line.v ¢íAdd. Features
§Edit§
§Yes§
¤ Enter number as described in "Activat- ing the room monitor and entering the number to be called" (page 60).
¤ Save changes (page 101).
60