Ending a consultation call

§End§

Press the display key.

You are reconnected with the external subscriber.

Initiating a conference call

§Conf.§ Press the display key.

You are in a three-way conference call with the external and the internal sub- scriber.

If the internal subscriber who has been called ends the call (press end call key a), you will be connected with the external subscriber. If you press end call key a, the external call will be transferred to the internal subscriber.

Accepting/rejecting call waiting during an internal call

If you get an external call while conducting an internal call, you will hear the call waiting tone (short tone). With Calling Line Identification, the caller's number or name will appear in the display.

Ending an internal call, accepting an external call

§Accept§ Press the display key.

The internal call is ended. You are connected to the external caller.

Rejecting the external call

Precondition: the external call is waiting on the fixed network connection.

§Reject§ Press the display key.

The call waiting tone is turned off. You remain connected with the internal sub- scriber. The ringer tone can still be heard on other registered handsets.

Please note:

You can not reject calls on the VoIP connection.

Using several handsets

Using a handset as a room monitor

If the room monitor is activated, a previously stored destination number is called as soon as a set noise level is reached in the room.

You can store an internal or external number in your handset as the destination number.

The room monitor call to an external number stops after around 90 seconds. The room monitor call to an internal number (handset) stops after around 3 minutes (depending on the base station). During use as a room monitor, all keys are barred except for the end call key a. The speaker of the handset is muted. The end call key can only be used to deactivate the handset.

When the room monitor is activated, incoming calls to the handset are indicated without a ringer tone and are only shown on the screen. The display and keypad are not illuminated and advisory tones are also turned off.

If you accept an incoming call, the room monitor mode is suspended for the duration of the call, but the function remains activated.

If you switch off the handset, the room monitor mode is deactivated. You must reactivate the function when you switch the handset back on.

59