Setting up a Gigaset.net Jabber-Account

Your phone is already registered with the Gigaset.net Jabber server. An account has already been assigned to the phone.

In order to chat with other Gigaset.net subscribers via this account, you must transfer the required Gigaset.net subscribers to a contact list (buddy list) on your PC. You can use any conventional Jabber client to do this (e.g. PSI, Miranda; see also e.g. http://www.swissjabber.ch).

In order to use the Gigaset.net Jabber account, proceed as follows:

¤Start the Web configurator, open the

Settings ¢Messaging ¢Messenger

Web page and select the Messenger Account Gigaset.net field. Your account data is displayed in Jabber ID and

Authentication password. You need this to create a buddy list via the Jabber cli- ent on your PC.

¤Start the Jabber client on your PC.

¤Enter your Gigaset.net Jabber ID in the Jabber client. The Jabber ID is composed of your Gigaset.net number and "@jabber.gigaset.net"

Example:

21721123901#9@jabber.gigaset.net

¤Now enter your Authentication password.

Please note:

–Do not select the "Create new account" option. Your Gigaset.net Jabber account has already been created in Gigaset.net.

–The "SSL connection" option must be deac- tivated in the Jabber client.

¤Now you can enter Gigaset.net sub- scribers as contacts (buddies).

For the Jabber ID of each subscriber, enter the subscriber's Gigaset.net number with "@jabber.gigaset.net" (example: 2141524901#9@jab- ber.gigaset.net).

A request to "Add to contact list" is sent to the subscriber.

Web configurator

If the subscriber answers this request pos- itively, he is added to your buddy list. The updated buddy list will be displayed on your handset the next time you restart Messenger. To restart: If necessary, close your connection to the messenger server (page 50) and then go back online

(page 49).

Please note:

For how to use your handset to go online and chat with or call buddies, see page 48.

Making e-mail settings

You can use your phone to be notified about new e-mail messages on your incoming e-mail server (page 45).

You must store the address/DNS name of your incoming e-mail server and your personal access data in the phone and activate the e-mail request on your incoming e-mail server, so that it can connect to the incoming e-mail server and your mailbox.

As soon as the data is stored in the phone, it will periodically (approx every 15 min- utes) connect to the incoming e-mail server and check if any new messages have been received.

¤Open the following Web page:

Settings ¢Messaging ¢E-Mail.

¤Enter the user name (account name) agreed with the Internet provider (max. 50 characters) in the field

Authentication Name.

¤Enter the password that you agreed with your provider for accessing the incoming e-mail server (max. 20 char- acters; case sensitive) in the field

Authentication password.

¤Enter the name of the incoming e-mail server (POP3 server) (max. 74 charac- ters) in the field POP3 Server. Example: pop.theserver.com.

91