First steps
If the attempt to create the entry fails (e.g. because the phone is not connected to the Internet), a message to this effect is displayed briefly (see page 14). You can then create the entry later via the Gigaset.net directory (see page 27).
Completing the VoIP settings
If you have made all the required entries, the message "Connection data complete" will appear on the display. The handset returns to idle status.
If all the settings are correct and if the phone can establish a connection to the VoIP server, then the internal name of the handset will be displayed (example):
ÐV
INT 1
10.08.0609:45
FixedLine IP
You can now use your phone to make calls via the fixed network and the Internet. Callers can reach you on your fixed network number and your VoIP number.
Please note:
To ensure that you can always be reached via the Internet, the router must be permanently connected to the Internet.
No connection to the Internet/VoIP serverIf one of the following messages is displayed instead of the internal name after the connection assistant is closed, errors have occurred:
uServer not accessible!uProvider registration failed!Below you will find possible causes and measures you can take.
The phone has no connection to the Inter- net.
¤Check the cable connection between the base station and the router (the LED on the base station must light up) and the connection between the router and the Internet connection.
¤Check whether the phone is connected to the LAN.
–It may not have been possible to dynamically assign an IP address to the phone
or
– You have assigned a static IP address to the phone that has either already been assigned to another LAN subscriber or does not belong to the router's address block.
¤ Find the IP address using the hand-
set menu:
v ¢Ð ¢¢Local Network (see page 69)¤Start the Web configurator with the IP address.
¤If no connection can be established, change the settings on the router
(activate DHCP server) or the
phone's IP address.Settings Base
Provider registration failed!uYour personal data for registering with the VoIP provider may have been entered incompletely or incorrectly.
¤Check your entries for Username,
Authent. Name and Authent. Password. In particular, check your use of upper and lower case.
To do this, open the following menu
on your handset:
v ¢Ð Settings ¢Telephony ¢VoIP ¢Provider Registr.14