Web configurator

¤From the Check for new E-Mail list, select the time interval at which your phone is to check whether new e-mail mes- sages have been received on the incoming e-mail server. Select Never to deactivate the check. Select one of the other values to activate the check for new e-mails.

Only activate the check if a messaging- capable handset (e.g. Gigaset S45) is registered to your base station.

¤Click on the Set button to save the set- tings in your phone.

Please note:

For how to show the messages from your mailbox on your handset, see page 46

Defining the server for firmware updates, starting the update

If necessary, you can load updates of the base station firmware onto your phone. You can either download the updates directly from the Internet or from a PC in your local network.

Using the Web configurator you can specify from where the firmware should be loaded.

¤Open the following Web page:

Settings ¢Miscellaneous.

Download the firmware update directly from the Internet

The server on which Siemens makes new firmware versions available for your base station is set by default. The URL of the Internet server is displayed in the Data server field.

The firmware is loaded from the Internet if you do not enter a local file in the User defined firmware file field before this update.

Please note:

–When updating from the Internet, checks are made to ensure that no newer version of the firmware exists. If this is not the case, the operation is terminated.

–You should not change the URL for the Internet server because this address is also used to load provider information from the Internet. If you have entered another URL, you can re-activate the default URL by restoring the base station default settings (page 66).

Conducting the firmware update locally

Precondition: A Web server is running on the local PC (e.g. Apache).

¤First, load the desired version of the firmware from the Internet onto a local PC.

¤In the User defined firmware file field enter the IP address of the PC in your local network and the complete path and name of the firmware file on the PC. Example: 192.168.2.105/S450IP/ Firmware_Datei.bin.

¤Click on Set to save the changes.

This setting is automatically used for the subsequent firmware update. The Inter- net server URL stays saved and is re-used for further firmware updates. If you want to use a local PC again for another update, then you have to re-enter the IP address and file name.

Please note:

If an error arises during a firmware update from a local PC, the most recent version of the firmware is automatically downloaded from the Internet.

92